N20 GPIO        

Navigation:  Hardware Specification > Electronics / GPIO >

N20 GPIO        

Previous pageReturn to chapter overviewNext page

The GPIO port uses a male Hirose HR10 6-pin connector and can be used as input and output. Input and output can be used at the same time and are connected to the camera's internal logic by optocouplers.

Pin Assignment

1

Ground (GND)

2

Power Supply 12-24V DC

3

Digital Input -

4

Digital Input +

5

Digital Output +

6

Digital Output -

Note: The connector and pinout is identical to IDS GigE uEye CP cameras.

GPIO Wiring and Usage

N2x_GPIO