Software Installation |
  
|
Software Installation |
|
Please make sure you have the IDS uEye driver installed in version 4.00 or higher. For N20, N30 and N35 cameras a driver with version 4.41 or higher is required. Please visit www.ensenso.com/download and download and install the latest driver for your system.
After the uEye driver installation is complete, download the latest EnsensoSDK software release from www.ensenso.com/download and follow the instructions on screen to install the software.
Starting with Halcon 11.0.3 the Ensenso interface ships with the Halcon installation and you can start using it right away after installing the EnsensoSDK. Some of the HDevelop examples included in the EnsensoSDK make use of the Halcon procedures provided with the SDK. If you want to run these examples you need to copy the procedure files manually. See section HDevelop Procedures for instructions.