<< Click to Display Table of Contents >> Navigation: NxLib API > Commands > StoreCalibration > Parameters > Calibration |
Specifies if the command should store the camera calibration.
Boolean |
When set to true, the calibration in the eeprom will be overidden with the currently active calibration from the Calibration node. |
false
Note: Setting this parameter to true can override your camera's factory calibration. If you need to restore the factory calibration later you will need to connect to the internet to download and restore the factory calibration. You can use NxView's calibration dialog to download the factory calibration directly. If you do not have internet access you can use another computer to navigate to http://www.ensenso.com/calib/, download the factory calibration for your camera's serial number as raw or pattern data and apply it offline via NxView's calibration dialog.