Sync cable to connect a uEye GigE Rev.1 camera to the projector. The cable connects the M8 signal lines to the camera's trigger input and output.
Wiring for sync cable to connect GigE uEye CP Rev. 1 cameras (front views on the cable plugs)
|
<< Click to Display Table of Contents >> Navigation: Hardware Specification > Electronics / GPIO > Cables > X-Series > M8 4-Pin - Hirose Adapter (6 pin) |
Sync cable to connect a uEye GigE Rev.1 camera to the projector. The cable connects the M8 signal lines to the camera's trigger input and output.
Wiring for sync cable to connect GigE uEye CP Rev. 1 cameras (front views on the cable plugs)