<< Click to Display Table of Contents >> Navigation: Hardware Specification > Vibration / Shock |
All N-series camera models have been tested for calibration stability under vibration and shock according to the following standards:
Vibration (sinusoidal) |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
Vibration (sinusoidal) |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
On X-series models the calibration stability under vibration and shock depends on the type of camera and lenses used in the assembly. All tests have been conducted with Ricoh FL-CC1214A -2M lenses with locking varnish applied between lens and C-Mount flange. Other lenses might show inferior performance.
Vibration (sinusoidal) |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
Vibration (sinusoidal) |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
Note: These specifications are valid for all X-series model identifiers. Depending on the specific configuration and lens type X-series cameras with 200mm baseline (i.e. X3x-*/*/*-200/*) might fulfill higher sinusoidal and shock ratings which need to be verified in application specific tests.