<< Click to Display Table of Contents >> Navigation: NxLib API > Commands > Open > Parameters > FirmwareUpload > Projector |
Specifies whether the upload of a new firmware is allowed before opening a projector.
A firmware upload while opening the device is only supported for X-series projectors. For XR-series projectors you need to download the firmware from the Ensenso website and use the UpdateFirmware command to upload it.
Note: Please make sure to safely connect the camera to power and Ethernet while performing a firmware upload.
String |
"Ignore" |
Try to open the device without checking the firmware for compatibility with the current SDK version. |
"None" |
Do not upload the firmware. |
|
"Allow" |
Update the firmware if the projector currently has an older firmware. |
|
"Force" |
Force a reupload of the firmware. |
"None"