MacAddresses¶
Specifies the MAC addresses for GigE Vision cameras in a Blind ethernet configuration.
Format
String |
A single MAC address of a GigE Vision camera, specified in the usual format of hexadecimal bytes separated by colons. |
Array |
An array of MAC addresses, each specified as a string. |
Default
If this parameter node is not specified, it defaults to an empty array.
Note
This node is only used when the Blind parameter is set. You cannot specify both the Cameras parameter and this one at the same time.
Note
For each device specified by this parameter, you have to specify a corresponding IP configuration in the Configuration parameter.