LoadUEyeParameterSetΒΆ

Applies a parameter set saved as ini file from the IDS uEyeCockpit application to one or more monocular cameras.

Note

Not all ini file parameters are adopted. The following settings will be reset after loading the ini values:

1. The color mode will be reset to the IS_CM_RGB8_PACKED or IS_CM_MONO8 value of the uEye API for color or monochrome cameras respectively.
2. The IS_AOI_IMAGE_POS_ABSOLUTE flag is set for the AOI X and Y positions, such that the captured region is correctly positioned in the image memory and the calibration can be applied as is.
3. The trigger mode is reapplied as defined by the TriggerMode node of the each camera.
4. The flash and GPIO configurations are reset as configured by the Output node.