Projector

Specifies whether the upload of a new firmware is allowed before opening a projector. A firmware upload while opening the device is only supported for X-series projectors. For XR-series projectors you need to download the firmware from the Ensenso website and use the UpdateFirmware command to upload it.

Note

Please make sure to safely connect the camera to power and Ethernet while performing a firmware upload.

Format

String	“Ignore”	Try to open the device without checking the firmware for compatibility with the current SDK version.
	“None”	Do not upload the firmware.
	“Allow”	Update the firmware if the projector currently has an older firmware.
	“Force”	Force a reupload of the firmware.

Default

“None”