Wiring Examples

To synchronize the cameras you have different possibilities:

  • Enable the trigger output on one of the cameras and set all other cameras to hardware triggered on the falling edge. The camera outputting the trigger signal can then be operated software triggered, and all other cameras will operate synchronously to this camera.

  • Supply an external trigger signal via another Y-Adapter. In this case all cameras should be set to hardware triggered.

Note

The internal electrical connections of all cables used in the following figures are described under the cables topic.

Here you can see different wiring examples for synchronizing multiple stereo and monocular cameras using the hardware trigger signal.

Cabling Overview

WiringOverview

Note

See the detailed:

Examples

WiringExample_N3x_Mono_GigE

From Left to right

AD00124, AD00119, AD00144 and AD00256