Vibration / Shock¶
N10, N20, N30, N35, N40, N45¶
All N-series camera models have been tested for calibration stability under vibration and shock according to the following standards:
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
X30, X36, XR30, XR36¶
Projection Unit¶
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 10g |
Shock |
IEC 60068-2-27 80g/1.9ms, 25g/6ms |
On X-series models the calibration stability under vibration and shock depends on the type of camera and lenses used in the assembly. All tests have been conducted with Ricoh FL-CC1214A -2M lenses with locking varnish applied between lens and C-Mount flange. Other lenses might show inferior performance.
X30-xCP, X36-xCP¶
Vibration (sinusoidal) |
IEC 60068-2-6 30-150Hz / 5g |
Shock |
IEC 60068-2-27 40g/1.9ms, 25g/6ms |
X30-xFA, X36-xFA, XR30-xFA, XR36-xFA¶
Vibration (sinusoidal) |
IEC 60068-2-6 30-500Hz / 5g |
Shock |
IEC 60068-2-27 60g/1.9ms, 25g/6ms |
Note
These specifications are valid for all X- and XR-series model identifiers. Depending on the specific configuration and lens type X-series cameras with 200mm baseline (i.e. X3x-*/*/*-200/*) might fulfill higher sinusoidal and shock ratings which need to be verified in application specific tests.