M8 4-Pin Universal Sync Adapter

This adapter cable allows to synchronize all camera types with M8 4-Pin connectors. Note that the adapter supplies power to up to two devices on the Camera port and on the Flash Out port. It does not draw power from the Trigger In port.

Universal sync adapter (frontal views on plugs)

Note

Note that you should not input trigger signals from the Supply port and the Trigger In port at the same time. Connecting multiple trigger sources might result in electrical damage of the outputs of the triggering devices.

Note

When synchronizing multiple X- or XR-series devices it is recommended to use a separate power supply for each device and use two Universal Sync Adapter cables to synchronize them by connecting Flash Out and Trigger In.

Connection of uEye or N-series cameras

You can use the M8-4P-Binder712 cable to connect uEye FA or Ensenso N3x/N4x cameras to the sync adapter.

You can use the M8-4P-Hirose-8P cable to connect uEye CP Rev. 2 cameras to the sync adapter.

You can use the M8-4P-Hirose-6P cable to connect uEye CP Rev. 1 cameras to the sync adapter.