N30/N35/N40/N45 GPIO Port

The GPIO port uses a male Binder 712 Series 7-pin connector and can be used as input and output. Input and output can be used at the same time and are connected to the camera’s internal logic by optocouplers.

Pin Assignment

1

Digital Input +

2

Power Supply 12-24V DC

3

Cable Shield

4

Ground (GND)

5

Digital Output +

6

Digital Output -

7

Digital Input -

Note

The connector and pinout is identical to the IDS GigE uEye RE/FA cameras.

GPIO Wiring and Usage

N3x_GPIO