M8 4-Pin Power CordΒΆ

The power cord supplies 24V to the X-/XR-series projection system. The internal regulator in the X30/X36 then forwards a 12V supply to both cameras.

You can also use this power supply to power N- and S-series devices if you do not use PoE. For N-series cameras you need to use an additional M8 4-pin to Hirose 8-pin Adapter.

Supplying_voltage_onto_the_M8_4-pin_Sensor/Actuator_cable_(view_on_power_cord_plug)

Supplying voltage onto the M8 4-pin Sensor/Actuator cable (view on power cord plug)

IDS Part Number

AD00219