open_framegrabber¶
This operator is used to create an acquisition handle.
Parameters¶
open_framegrabber ('Ensenso-NxLib', 0, 0, 0, 0, 0, 0, 'default', 0, ColorSpace, Generic, 'false', CameraType, Device, 0, 0, AcqHandle)
Parameter |
Values |
Default |
Description |
---|---|---|---|
ColorSpace |
‘Raw’, ‘Rectified’ |
‘Raw’ |
Specifies if the Raw or Rectified image is returned by the ‘grab_image’ operator. |
Generic |
[-1, ‘auto_grab_data=0’, ‘auto_grab_data=1’, ‘parallel_execution=0’, ‘parallel_execution=1’] |
-1 |
Activate/deactivate the ‘auto_grab_data’ and ‘ parallel_execution ‘ flag. By default ‘auto_grab_data’ is activated and ‘parallel_execution’ is deactivated. See the ‘grab_data’ and Executing Commands topics for more information on the effects. Note: You need at least version 1.9 of the NxLib to use the parallel execution. |
CameraType |
‘Stereo’, ‘Monocular’, ‘Item’ |
‘Stereo’ |
Describes the type of the handle. |
Device (with CameraType: ‘Stereo’, ‘Monocular’) |
[‘’, ‘<serial_number>’, ‘<eeprom_id>’] |
‘’ |
Specifies to which camera the handle is going to refer to. By default the first detected Stereo/Monocular device is referenced. |
Device (with CameraType: ‘Item’) |
[‘’,’<node_path>’] |
‘’ |
Specifies to which node the handle is going to refer to. By default the the root of the tree is referenced. |
AcqHandle |
A variable where the created handle is stored. |