<< Click to Display Table of Contents >> Navigation: Hardware Specification > Vibration / Shock |
All N-series camera models have been tested for calibration stability under vibration and shock according to the following standards:
Vibration (sinusoidal) |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
On X-series camera models the calibration stability under vibration and shock depends on the type of camera and lenses used in the assembly:
uEye GigE CP based X-series assemblies only support reduced vibration stability.
For lenses of lengths up to 45mm a lens weight up to 70 grams the mechanical stability is classified as follows:
Vibration (sinusoidal) |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |