N20 GPIO Port¶
The GPIO port uses a male Hirose HR10 6-pin connector and can be used as input and output. Input and output can be used at the same time and are connected to the camera’s internal logic by optocouplers.
Pin Assignment¶
1 |
Ground (GND) |
2 |
Power Supply 12-24V DC |
3 |
Digital Input - |
4 |
Digital Input + |
5 |
Digital Output + |
6 |
Digital Output - |
Note
The connector and pinout is identical to IDS GigE uEye CP cameras.
GPIO Wiring and Usage¶
