Hardware Specification¶
Select a sub chapter for detailed hardware properties.
CE / FCC Compliance
N-Series
All N10 and N20/N30/N35 camera models are CE and FCC compliant with the following characteristics:
Radiated emission |
DIN EN 55011, FCC Class B |
Conducted emission |
DIN EN 55022, FCC Class B |
ESD immunity |
DIN EN 61000-4-2 |
HF field immunity |
DIN EN 61000-4-3 |
Electrical fast transient / Burst |
DIN EN 61000-4-4 |
Conducted disturbance immunity |
DIN EN 61000-4-6 |
For N20, N30, N35 cameras additionally:
Surge |
DIN EN 61000-4-5 |
X/XR-Series
All X30/X36/XR30/XR36 projection modules are CE and FCC compliant with the following characteristics:
Radiated/conducted emmision |
EN 61000-6-4 |
ESD immunity |
EN 61000-6-2 |
HF field immunity |
EN 61000-4-3 |
Conducted disturbance immunity |
EN 61000-4-5 / EN 61000-4-6 |
Fast transient immunity |
EN 61000-4-4 |
Note
All cameras must be installed by ESD trained professionals only.
Illumination Hazards
See Illumination.
Intended use
Ensenso cameras are to be used to capture images for visualization and image processing tasks. The devices are designed for use in industrial environments.
Safety Instructions
Read carefully the information in this manual before installing and using an Ensenso product. The producer is not responsible for damages and injury, which can occur due to false handling of a product and ignoring the safety instructions. All warranty will be spoiled in this case. The products are not authorized for use in security relevant applications. If used in security relevant applications, the customer is responsible for the necessary approvals. If the product is modified or changed the applicable approvals like CE, FCC or UL become invalid. In this case the customer is responsible for ensuring product conformity. The products are not toys and should be kept and operated out of reach of children. All products must be connected, taken into operation and maintained only by appropriately qualified personnel. The cameras must be installed in such way that the specifications described in this manual are met. Only operate the products under ambient conditions described in this manual. Carefully observe the IP protection class for your camera model. Do not subject this product to direct sunlight, moisture or shock. Lay cables in such way that no one can step on or they do not represent a trip hazard. Keep packing materials like films away from children. In case of abuse there is a risk of suffocation.