Cameras¶
The camera for which the eeprom calibration data is requested.
Format
Number |
A single camera eeprom id |
String |
A single camera serial number |
Default
If this parameter node is not specified, it defaults to an array of serial numbers of all open cameras in the current NxLib instance.
Note
The command can only get the calibration data of a single camera. When multiple cameras are open, this parameter must therefore be specified.
Note
Before this command can be used, the camera must have a calibration loaded. This can happen with the LoadCalibration parameter of the Open command (which is true by default) or with the LoadCalibration command.